• Input
    Voltage:
    120VAC/DC, 24VAC/DC
    Frequency:
    50/60 Hz or DC
    Tolerance (voltage):
    ± 10% of nominal
    Power Consumption:
    3 VA maximum
    Transient Protection:
    MOV
  • Output
    Type:
    Electromechanical relay
    Rating:
    10A @ 240VAC maximum
  • Timing
    Available Types:
    Off delay, Pulsed inteval, Maintained interval
    Repeat Accuracy:
    ± 1% of setting or 8 msec, whichever is greater
    Reset Time:
    50 msec minimum- Types 2 & 4, 100 msec minimum - Type 5
    Indication:
    LED - ON when timing
    Timing Ramp:
    0.06 sec minimum time - 1MΩ/sec, 0.5 sec minimum time - 100kΩ/sec, 5 sec minimum time - 10kΩ/sec
    Time Range:
    0.06 to 1000 secs in 10 ranges
    Range Tolerance:
    ≤ 30% at maximum, ≤ 0% at minimum
    Control:
    Isolated contact closure
    Control Terminals:
    5-6 (Types 2 and 4) 2-7(for option 13 - Type 5)
    Voltage Present at Control Terminals:
    70VDC (120VAC/DC - Types 2 and 4), 30VDC (24VAC - Types 2 and 4), 24VDC (24VDC - Types 2 and 4) Same as input voltage (Type 5) Shipped as an off delay. Remove jumper clip (see dimensions) to convert to pulsed interval
  • Physical
    Operating Temp:
    0° to 50° C (32° to 120° F)
    Timing Variation vs. Temp:
    Greater of ≤ 5% maximum or 8 msec, whichever is greater (up to 500 secs)
    Mounting:
    Plug-In
    Termination:
    8 or 11 pin socket
    Housing:
    Plastic

Wiring Terminal Location

Wiring

Dimensions

ISSC Kanson 1018 Timer

Ordering Data

Ordering